Toro T5 Series Pop-up Sprinkler

Toro T5 Series ¾” gear-drive rotor

The new Toro® T5 Series Rotor has the features to satisfy all your basic irrigation needs while surprising you with a few extras. In the same size body as competitive units with only a 4” pop-up, the new T5 delivers a full 5 inches of pop-up height. Part and full-circle arcs are all in one sprinkler with a quick and easy top adjustment feature that allows arc sets between 40 – 360 degrees. The nozzle tree offers standard angles, plus a low angle set. Both offer a wide selection of flows. Nozzles are balanced allowing for the use of any nozzle on the same zone where different arcs are being irrigated at the same time. This multi-purpose rotor packs a lot of convenience into one competitively priced unit. For those day-in and day-out installations, the T5 is the only rotor you’ll need.

Features & Benefits

5” Pop-Up
Easily replaces many competitive units in the same footprint but delivers an extra inch of pop-up.
Standard Rubber Cover
The top of the sprinkler is covered with a heavy duty rubber cover to minimize impact injuries and reduce liability.
Nozzle Tree
The T5 comes with a full nozzle tree of 8 standard nozzles (25°) and 4 low angle nozzles (10°).
Check Valve
Check valve with a hold back strength of 7’ of elevation change.
Top Adjust Arc Set
The T5 can be set between a minimum arc set of 40° and a full circle set of 360°. Arc changes are made from the top of the sprinkler while popped up or down by using a small slotted screwdriver.

Specifications

• Radius: 28'–50' (9,7m–15,2m)
• Flow rate: 0.5–10 GPM (1,8–37,8 LPM)
• Trajectory: 26°
• Recommended operating pressure range: 30–70 psi (2,0–4,7 Bar)
• Optimum operating pressure: 50 psi (3,5 Bar)
• 3⁄4" (20mm) threaded NPT inlet
• Dimensions:
• Pop-up to nozzle: 5" (127mm)
• Base diameter: 2.9" (73mm)
• Height: 7.6" (193mm)